Br-CC12

Card Cage For One Smart ‘Brick’ Brain and Two Smart ‘Brick’ Cards
With Both Ribbon Cable and Screw Terminals

The Br-CC12 Card Cage with both ribbon cable and screw terminals can be used to mount one Smart ‘Brick’ Brain and two Smart ‘Brick’ Cards.

Animation equipment which can be mounted in the Br-CC12 include:

• Br-Brain4: Smart Brick Brain that can control and synchronize any number of Smart Bricks. Synchronizes with Smpte, LaserDisc and Pioneer DVD players. Stores and outputs show data for up to four full DMX-512 universes.
• Removable Sd/SdHC flash card for show data storage. Within the DMX-512 there can be eight independent show sequences running.
• Br-ANA: Sixteen 0-10 volt analog outputs plus DMX-512 output Brick. The Br-ANA can be used as a ‘Smart’ or ‘Dumb’ Brick. RealTime data is sent to the Br-ANA through its RS-422 serial port or DMX-512 port. Shows can be permanently downloaded and stored in the Br-ANA‘s flash memory through the RS-422 serial port.
  
• Br-MultiBrick32: Thirty-two digital output ‘Brick’. It can be used as a ‘Smart’ or ‘Dumb’ Brick. RealTime data is sent to the Br-MultiBrick32 through its RS-422 serial port or DMX-512 port. Shows can be permanently downloaded and stored in the Br-MultiBrick32’s flash memory through the RS-422 serial port. Outputs are individually self-protected to make them nearly impossible to blow out.
• Br-EFB: Closed Feedback Loop Smart Brick. Four or Eight channels of control are available. RealTime data is sent to the Br-EFB through its RS-422 serial port or DMX-512 port. Shows can be permanently downloaded and stored in the Br-EFB’s flash memory through the RS-422 serial port.
• Br-ZBR: Z-Brick output cards which each adds thirty-two digital outputs through the DMX-512 port. Outputs are individually self-protected to make them nearly impossible to blow out.