Sd-Startkit/40

Stereo Audio Playback System, Show Control,
Lighting Control & Amplifier System Starter Kit

The Sd-50/40 Starter Kit includes power supply, appropriate cables, SD flash card, Flash reader/writer & CD w/software and manuals. Sd-50/40 not included.

Sd-50/40 Starter Kit contents:

• USB-Card-Rd/Wr: USB2.0 Flash Card Reader/Writer. Requires no software or drivers. For programming Secure Digital (Sd) memory cards.
• MC-Sd Flash Card: MC-Sd Secure Digital (Sd) Flash Card
• PS-24vdc/5.0A: 120 Watt switching supply featuring 95-250 vac in 24 vdc 5.0 Amp outputs
• C-LineCord-2c/USA: Two conducter 115vac line cord.
• C-50Trans:Adds screw terminal and Servomotor outputs
• Mp3-50/CBL: RS-232 serial cable
• GilderTweaker: Small screwdriver set
• GilderCD: CD-ROM with all of our Software & Manuals

Note: Parts may differ from those shown

The Sd-50/40 is a complete stand alone stereo audio playback system with 40 Show Control Outputs. The show control and DMX-512 output options make it into a complete Audio and Show Control solution.

Features of the Sd-50/40 include:

• Adds forty (Sd-50/40) digital (on/off) Show Control outputs to a Sd-50. Eight of the outputs can be used for controlling eight model airplane-style ServoMotors.
• Optional GPS clock (Sd-50/GPS40) for triggering using a 365 day schedule or by location. Locations where sounds and shows are played are set using Google Earth. The angle of view sets direction of trigger.
• DMX-512 inputs for controlling Animation & Audio. DMX-512 outputs for up to 512 channels.
• Automatic “program in place” download through your PC’s serial port or the MMC/Sd card. Draw the sequence you need on your computer using our easy-to-use PC•MACs software, or with “Hardwareless RealTime” mode, program using the PC’s mouse and keyboard. PC•MACs will remember exactly what you do and precisely when you did it. Once programmed, the PC can then go away.
• Four MBytes of nonvolatile Show Control memory. Using all forty Sd-50/40 Show Control outputs, this gives a show capacity of about eight hours at thirty updates per second! Once downloaded, show data is retained for approximately forty years, with or without power applied. Up to 255 individual shows can be loaded onto a Sd-50/40 at one time.
• Networkable! Four optoisolated inputs can be used to start, stop, pause, continue, or access shows. They can also be controlled through the RS-232 or networked RS-422 serial ports, MIDI, or IR Triggers.
• Show Control outputs are each rated for 150 ma. continuous, or 500 ma. peak. This can drive small solenoid valves, relays, LEDs, lights and other similar loads. Use solid state relays for larger loads or higher voltages (DRV-05, SSR-FS, LC-8SP). Digital to Analog converters (DAC-08 or DAC-Quad) can be used if you need analog control signals.